3. Temperature conditions: The ambient temperature of a Small Slant Bed Cnc Lathe is lower than 30 degrees, and the relative temperature is less than 80%. Generally, the numerical control electric control box is internally provided with an exhaust fan or a cooling fan to keep the electronic components, especially the central processing unit, with a constant operating temperature or a small temperature difference. Excessive temperature and humidity will result in reduced life of the control system components and lead to increased failure. Increased temperature and humidity, increased dust can cause bonding on the integrated circuit board and cause short circuits.
4. Standard use: When the machine tool user uses the machine tool, it is not allowed to arbitrarily change the parameters set by the manufacturer in the control system. The setting of these parameters is directly related to the dynamic characteristics of the various parts of the machine. Only the value of the gap compensation parameter can be adjusted according to the actual situation. The user cannot change the machine attachment at will, such as using a hydraulic chuck that exceeds the specifications. When the manufacturer sets the accessories, it fully considers the matching of the parameters of each link. Blind replacement causes mismatches in the parameters of various links, and even causes an accident that is not estimated. The pressure of the hydraulic chuck, hydraulic tool holder, hydraulic tailstock, and hydraulic cylinder should be within the allowable stress range, and no increase is allowed.