Focusing on precision CNC lathe         
     Engaging in machine automation

  • Precision CNC Lathes with Gantry Loader
  • Components
Home / News / Company News

Preparation Of The Slant Bed Cnc Lathe Before Commissioning

May. 23, 2019

1. Before use, the Precision CNC Lathe With Detecting System should pass the geometric accuracy test before cleaning the machine. Specifically, it is necessary to use cotton cloth or silk cloth containing a cleaning agent to clean. At this stage, cotton yarn or gauze should not be used to avoid the phenomenon of machine jamming, which means that the inclined bed CNC lathe should be protected at the factory. Rinse off the rust-proof oil or anti-corrosive paint applied to the machined surface, and clean the dust on the outer surface. At the same time, the manufacturer's specified lubricant is applied to each sliding surface and working surface.

Precision Cnc Lathe With Detecting System

2. Also check carefully whether the parts of the CNC Lathe With Detecting System on the slant bed have filled the oil according to the relevant requirements, and whether the coolant in the cooling box is sufficient. Whether the oil of the machine hydraulic station or the automatic lubrication device can reach the position specified by the oil level indicator.

3. At the same time, check whether the switches and components in the electrical control box are normal, and whether the plug-in integrated circuit boards are in normal operation.

4. After power-on, we also need to start the centralized lubrication installation to ensure that there is enough lubricating oil on the lubrication part and the lubricating oil to make a series of preparations before the machine is used.

  • Mob: +86 180 5748 6168
  • Tel.: +86 180 5748 6168
  • Fax: +86 574 8809 5075
  • E-mail:
  • Skype:
  • Add.: No.16,gaoya road, jiangshan science & technology zone,yinzhou,ningbo ,zhejiang ,CHINA
Follow Us